After fiddling with the BIOS settings, my Supermicro X9DRL-iF doesn’t boot anymore. It doesn’t post and get stuck after PXE with the code B2 and the Supermicro logo.
I’ve tried to clear the CMOS by removing the battery and shorting the JBT1 pads, without success.
I’ve tried booting a FreeDOS 1.0 USB stick made with my Mac and Unetbootin, I extracted the BIOS image on the stick and renamed it
SUPER.ROM. I tried to boot starting up with CTRL-Home keys pressed, no luck either.
It just reads “sending OOB to BMC” at the bottom of the screen, but it still get stucked at the last Supermicro logo page with code B2…
In the readme file included in the BIOS update zip from Supermicro they are talking about moving the jumpers JPME1 and JPME2 to bypass SPI flash security and force the system to operate in the Manufacture Mode, but II think this is only related to update bios via network.
The ressources I could find:
The MB official manual, the readme from the BIOS zip, this tutorial:
Supermicro X9DRL-iF hang up at POST screen in B2 status code with no any external device
I had a similar problem with Supermicro X9DAi, and I was able to wedge in boot process with pressing F11 key (for boot from the usb key and flash the BIOS) before trying to load the BIOS after I changed the video card. This error, as I understand it, is an error in accessing the periphery, it needs to be removed all peripherals in turn and keep trying boot with inserted usb driver (with new BIOS flash and AFUDOS).
Answered by DJNZ on November 14, 2021
12 Asked on January 12, 2021 by rdhainaut
0 Asked on January 12, 2021 by square_eyes
3 Asked on January 12, 2021 by asheesh-kubde
1 Asked on January 12, 2021 by andreas
1 Asked on January 12, 2021 by dhruv-garg
5 Asked on January 12, 2021 by lazer
1 Asked on January 11, 2021 by melvin-lai
3 Asked on January 11, 2021 by jakub
0 Asked on January 11, 2021
1 Asked on January 10, 2021 by darshan-l
1 Asked on January 10, 2021 by erik
1 Asked on January 10, 2021 by geoffds
0 Asked on January 10, 2021 by fitzmode
1 Asked on January 9, 2021 by karim-alahmed
0 Asked on January 9, 2021 by anhnha
1 Asked on January 9, 2021
0 Asked on January 8, 2021 by tom-s
Get help from others!