InsideDarkWeb.com

Use of carpet tape for turning a bowl

I’m learning to use an inherited wood lathe, and would like to turn a basic bowl. I have a couple of face plates but no three-jaw chuck (and no funds to buy one right now). I have read you can use something called "turners tape" to hold the bottom of a bowl to a face plate. Does carpet tape work as well? It is easy to run to the local hardware store and buy carpet tape, it will take a little longer to source some turners tape. Will I end up ruining my work piece if my tool catches and I’m using carpet tape?

Woodworking Asked on July 26, 2021

1 Answers

One Answer

I have read you can use something called "turners tape" to hold the bottom of a bowl to a face plate.

In this video, Mike Peace demonstrates using turner's tape for holding small items. He says he uses it sometimes for reversing a small bowl, lids for boxes, etc. What's nice about it is that you don't need to leave a tenon for the chuck to grab onto. Also, it's flexible, so the mating surfaces don't necessarily have to be flat as long as they fit together well.

Notice that the taped part of the bowl in the video is a significant portion of the overall diameter of the workpiece. Turner's tape would likely not be a good choice for large or even medium sized bowl where the foot is small compared to the bowl's diameter.

Does carpet tape work as well?

No. At least, Mike emphasizes several times in the video that turner's tape is not carpet tape, and he talks about the very strong bond that you can get with turner's tape. Turner's tape is a cloth tape with strong adhesive, so it's more likely to bond well to slightly irregular surfaces.

I use carpet tape all the time for things like holding a template in place for routing. It works very well for that, but there's no way I'd trust it to hold a workpiece spinning at hundreds of RPM.

If a proper four-jaw scroll chuck isn't an option (three-jaw chucks are used more for metal work), and if you can't get turner's tape right away, consider a different option such as gluing the bottom of the bowl to a sacrificial piece that's screwed to a face plate. And again, without a chuck, keep the work small.

Will I end up ruining my work piece if my tool catches and I'm using carpet tape?

If your tool catches you might ruin your piece anyway, but if it catches while you're using carpet tape it might ruin your day as well. Be sure to stand outside the line of fire if you try it.

Correct answer by Caleb on July 26, 2021

Add your own answers!

Related Questions

Table saw bogging down more than usual

2  Asked on August 30, 2021 by ljk2000

   

Cutting a spherical depression in wood

3  Asked on August 30, 2021 by ptrickono

     

Cut down a veneered table top

1  Asked on August 30, 2021 by saraht

   

Strength of plywood walls for built-in bookshelves

1  Asked on August 30, 2021 by robert-farley

     

How to keep the thread of a vice clean?

3  Asked on August 30, 2021 by guy

 

Is rebate/rabbet joint with glue only strong enough?

2  Asked on August 30, 2021 by anatoly-vasilyev

     

How to straighten AC plywood for desktop

1  Asked on August 30, 2021 by zwiebelspaetzle

     

Variation in shades of maple wood

1  Asked on August 30, 2021 by atulw

 

Butt joints on both sides on the same piece of wood

1  Asked on August 30, 2021 by galaticos23

   

What is a router plane fence designed for?

1  Asked on August 30, 2021 by lehrlukas

   

How can I build a foldable desk within my window frame?

0  Asked on August 30, 2021 by jehandadk

   

Do chainsaw gloves protect your hands from the blade of a jigsaw?

1  Asked on August 30, 2021 by robert-werner

   

Ask a Question

Get help from others!

© 2021 InsideDarkWeb.com. All rights reserved.